If you want to be a decorator, start with house in

  • Detail

Many novice decorators want to become a decorator in an instant, but how can they become a decorator? The first is to learn how to inspect a house. The acceptance of new houses is particularly important in the decoration of new houses, and it is also related to the quality of home decoration in the future. Therefore, many owners are willing to spend money to invite house inspectors to inspect houses when decorating. In fact, house inspection itself is a very simple thing. Next, the Xiaobian of Wuhan home decoration network summarizes the nine point house inspection experience for you. If you want to be a decorator, come and have a look

1. Whether the floor is flat:

to check whether the floor is flat, just use a long ruler (or a special ruler with a horizontal ruler) and lean against the wall floor to check whether it is flat. At the same time, observe whether there are scratches, cracks and hollows on the wall

2 Whether there are cracks on the wall surface and hollows on the wall and ground:

while checking whether the wall surface is flat, we also need to check whether there are cracks on the wall surface (four common cracks: strength cracks, settlement cracks, temperature cracks, deformation cracks), whether there are leaking barbed wire and reinforcement. If you find the above wall problems during the house inspection, you can sign after the developer helps repair them

3. Whether the indoor stairs have defects:

it mainly depends on the flatness of the stairs and whether there are defects

4. Whether the installation track of doors and windows is smooth:

in terms of door and window inspection, the most important thing is to check whether the track of doors and windows is smooth. Especially those who open the windows horizontally, we must pay attention to whether they can be closed tightly. Otherwise, there will be wind entering the room, especially in the cold north, so you will be miserable in winter. If you find these problems during the house inspection, inform the developer directly, and they will repair them soon. If you have signed, you can find the developer to deal with these problems. Then their efficiency is turtle speed. The second aspect is to check whether the door and window glasses of the new house are damaged. Whether the window frame is deformed. In case of any abnormality, hurry to find the developer to solve it. This is a matter that requires your attention, especially the doors and windows of each room should be carefully checked to avoid unnecessary money loss

5. Whether the door is bumped and painted:

it is necessary to carefully check whether the door is bumped and painted. Strictly speaking, the inner, outer and top surfaces of the door must be painted. The clearance of the door should not be too large. There is no special sound when the door is opened and closed. The four sides of the door should be close to the door frame. The clearance on one side of the door lock should not be too large. At the same time, don't forget to try the lock, mainly to see whether the key is easy to use and whether the door lock is firmly installed. Other important points are the sound insulation effect of the door and the degree of sealing

6. Balcony equipment is not damaged:

when accepting the balcony, it is mainly to see whether the ground of the balcony is flat or damaged, and then whether the window equipment of the balcony is intact

7. The floor height cannot be less than 2.8 meters:

as a building, the building height is generally 2.8 meters, the actual height cannot be less than 2.6 meters, the actual height of 3 meters cannot be less than 2.75 meters, but the residential floor height cannot be less than 2.8 meters

8. Whether the drainage is normal:

with water supply, the remaining problem is to solve the drainage problem. The acceptance drainage is mainly located in the basin, toilet, bathtub, toilet, kitchen, balcony floor drain, etc. (you should hear the sound of grunting and there is no water on the surface). The qualified ground should not have ponding, because the floor drain is the lowest place, but a certain height of the later paved ground is reserved around the floor drain of the blank room. Try to make the water flow as large and rapid as possible. Check the water pressure and test the drainage speed

9. Check the doors and windows:

(1) whether the latch and door lock of the gate and room door are too long and tight. (2) Is the door insert inserted too little? Whether the door clearance is too large (especially on the side of the door lock). (3) Are the four sides of the door close to the door frame? Whether there is any special sound when the door is opened and closed. (4) Is there any water stain under the windowsill? If yes, the window may be leaking. (5) Whether there is any gap between the window edge and the concrete interface. (6) Is the opening and closing of the window too tight? Can you close it properly. (7) Whether the window glass is in good condition




Copyright © 2011 JIN SHI